IOTech Systems Limited
Best viewed on a device with a bigger screen...
Bluetooth Low Energy (BLE), is a light-weight subset of classic Bluetooth and was introduced as part of the Bluetooth 4.0 specification. BLE is a close-range, wireless technology that is prevalent in connecting low-power or battery-based consumer IoT devices including wearables, phones and tablet PCs. Compared to the full Bluetooth protocol, BLE is focused on delivering small amounts of data at low speeds.
BLE devices define both a General Access Profile (GAP) and a Generic Attribute Profile (GATT). The GAP controls the connections and visibility of devices, while the GATT defines how two devices transfer data via BLE Services and Characteristics. GATT-based data flow occurs after two devices are connected based on the GAP advertising and discovery process.
BLE devices are categorized into 2 types: peripheral (GATT Server) devices, such as heart rate monitors or proximity tags, are the small, low-power, resource-constrained devices that connect to a much more powerful central (GATT Client) device such as a phone, tablet or gateway. A peripheral can only be connected to a single central device at a time, so once connected, a peripheral will stop advertising itself.
IOTech’s BLE device connector supports a wide range of functionality including configurable dynamic discovery and automatic onboarding of watched BLE devices.
The BLE device connector implements the following key features:
Note the BLE device connector requires the installation of BlueZ and the D-BUS daemon on the host machine running the connector.
Discovery of BLE devices that are in advertising mode and within range
Connecting to a BLE device that meets the above criteria
The capability to automatically onboard watched devices configured by an allow-list and block-list
Reading the values of a connected device’s specified GATT characteristics
Writing the values of a connected device’s specified GATT characteristics
Automatic notification when a connected device’s GATT characteristic is updated
Additional support for notifications when multiple GATT characteristics use the same UUID
The ability to specify conversion functions for a set of vendor-specific GATT characteristics
Automatic disconnection when the BLE device is removed or is out-of-range
Support for Boolean, Int8, Uint8, Int16, Uint16, Int32, Uint32, Int64, Uint64, Float32, Float64 and String data types
Note the BLE device connector requires the installation of BlueZ and the D-BUS daemon on the host machine running the connector.
Click the Buy Now button below or Contact Us if you need assistance.
ProductsIoT ConnectivityDevice ConnectivityIOTech Supported Device TechnologiesBluetooth Low Energy (BLE) Device Connector
The Catalyst 3 Science Square
Newcastle upon Tyne United Kingdom NE4 5TG
bluetooth, BLE, Bluetooth Low Energy, device protocol, industrial automation, IoT, industrial IoT, IoT edge, edge computing, device connectivity, device protocol, device technology, IoT systems, edge system, edge computing, internet of things, IoT, Industrial IoT